How To Enable Intel Optane Memory In Windows 10

The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser past clicking one of the post-obit links.

Safari
Chrome
Edge
Firefox

Article ID: 000035836 Content Blazon: Troubleshooting Final Reviewed: 02/03/2022

How to Enable Intel® Optane™ Retentiveness If BIOS Is Ready to Legacy Mode

Surroundings

Operating Organisation

Windows 11, 64-bit*, Windows® 10, 64-bit*

Congenital IN - ARTICLE INTRO SECOND COMPONENT

Summary

Steps to change the partition tabular array format of the booting drive from MBR to GPT

Clarification

Unable to modify the SATA Mode Selection to RST; the system does not boot afterward that.
Operating Arrangement (OS) will non boot after changing the BIOS fashion to Intel® RST Premium with Intel® Optane™ Arrangement Acceleration (RAID)

Resolution

Notation

This process may cause data issues. Dorsum up your information before following this process.

BIOS set in Legacy Mode means that the partition style of the OS drive is set in MBR format which is not uniform with Intel® Optane™ memory. When the SATA controller mode in BIOS is changed to Intel® RST Premium with Intel® Optane™ System Acceleration (RAID) without converting the division way, the system will have booting issues. In gild to catechumen the partition style from MBR to GPT follow these steps:

Back up all files on your system
Convert the partition table from MBR to GPT using the Windows* toolMBR2GPT.exe. Brand sure that you have the latest Windows® updates installed.
1. Open Command Prompt with administrator privileges
2. Result the following control: mbr2gpt.exe /convert /allowfullOS
When the process is consummate,restart the arrangement and go into BIOS.
Inside BIOS, prepare the SATA Mode Choice toIntel RST Premium with Intel® Optane™ Arrangement Dispatch (RAID). Note: The BIOS options may vary past vendor, below are suggested steps that may apply to your system BIOS. For specific BIOS navigation options, contact the system manufacturer.
1. Within BIOS,press F7 to go to the Advanced Mode.
2. Go to Boot\CMS (Compatibility Back up Module) and disable this option
3. Go to Advanced\PCH Storage Configuration and setthe SATA Style setting to Intel RST Premium with Intel® Optane™ Organization Acceleration (RAID)
4. Press F10 to salvage changes and restart the arrangement

The arrangement should be able to kick now into the OS after the BIOS changes. Continue with the enablement process of the Intel® Optane™ memory from the OS.