How To Access Bios Windows 8

How To: Enter the system BIOS or UEFI on Windows 8

Access to the system BIOS will depend on Windows eight installed on your computer.

• If you upgraded to Windows 8.1 or Windows eight from Windows vii, then you lot will follow the instructions under UPGRADE.
• If your figurer came from the mill with Windows eight.1 or Windows 8 installed, and so follow the instructions under PREINSTALLED.

Notation: On Windows 8.i and Windows 8 operating systems that came preinstalled on the laptop from the factory, the BIOS has been replaced past UEFI (Unified Extensible Firmware Interface).

PREINSTALLED

Important:The following procedures Just use to Windows 8.one and Windows viii operating systems that came preinstalled on the laptop from the mill when purchased new. These process DO NOT apply to Windows 8.i or Windows viii operating systems that were upgraded from Windows seven or earlier.

To access the UEFI, perform the following:

Important: There are many possible ways to enter the Avant-garde Startup Options, for boosted means to enter, refer to the How To: Safe Mode and other Avant-garde Startup Options in Windows viii article. Utilise that article if this method fails.

1. Hold the Windows key and press the 'w' to open up a search pane.
2. Type "UEFI" in the search box.
3. Select "Avant-garde Startup Options" or "Change advanced startup options."

   

4. Under the "General" carte item, whorl to the lesser.
5. Nether "Advanced Startup" click "Restart At present" push.

   

6. When the "Choose an Selection" screen appears, select "Troubleshoot".

   

7. In the Troubleshoot bill of fare select "Avant-garde Options".

   

8. In the Advanced Options bill of fare select "UEFI Firmware Settings".

   

9. Click the "Restart" push button to kicking into the "Setup Utility" (UEFI) screen.

   

10. When the laptop restarts, the UEFI screen will be displayed.

UPGRADE

Of import: The following procedures ONLY apply to Windows 8 operating systems that were upgraded from Windows 7 or earlier. These procedure DO Not apply to manufacturing plant Windows viii operating systems installed on the laptop from the manufactory when purchased new.

To enter the BIOS from a Windows 8 upgrade, you must first close down the laptop completely (non suspended, or in standby mode, or in hibernation mode). If an external keyboard is attached to the laptop (either directly or via a docking station or a port-replicator), disconnect information technology until you have completed this process.

To close the Windows 8 laptop down completely, How to Close Downwardly a Laptop with Windows 8.

Use one of the following methods to acess the BIOS.

F2 key method

1. Turn the figurer on.
2. If you see an invitation to press the F2 cardinal to enter Setup, exercise and so.
3. The Setup (BIOS) screen will announced.
4. If this method does not work, repeat it, but hold F2.

F12 key method

1. Turn the computer on.
2. If y'all see an invitation to press the F12 central, do and then.
3. Boot options volition announced forth with the power to enter Setup.
4. Using the pointer primal, scroll down and select <Enter Setup>.
5. Press Enter.
6. The Setup (BIOS) screen volition appear.
7. If this method does not work, repeat it, but concur F12.

Toshiba Hardware utility method

The Toshiba Hardware utility (HWSetup) tin can also exist used to change some of the settings if F2 or F12 does non piece of work. This method may just work on some laptops.

1. On the Start Screen blazon in HWSetup.
2. In the search returns select HW Setup to open.
3. Make changes as necessary and select "Employ."
4. Reboot the reckoner if not prompted to do so.

How To Access Bios Windows 8,

Source: https://support.dynabook.com/support/viewContentDetail?contentId=4009232

Posted by: huntyournothed.blogspot.com

Share this post